Future Smart Transportation

1. Future Public Transportation:  This vehicle project is a hybrid of a helicopter and an electric suburban train, designed for a large number of people and equipped to provide maximum comfort. The engineers placed not only chairs but also tables, a dining area, and a bar in a spacious lounge. The vehicle is lifted in the air using a combination of six powerful propellers and moves along the predetermined path through a special Lane is located at the bottom. It also travels at low altitudes on the ground helping to avoid traffic jams in the typical risks of road and air travel. 

2. Next to Future Transportation: Another project for a means of transport of the future has been developed by a team of engineers under the direction of the genius behind the idea Tommaso Getz Helen, according to one of the developers this passenger the vehicle will become the main means of transport in the city. It's based on modular systems, each cabin module can be a personal transport system for the passengers or interact with each other getting together directly on the track in the form of a train or a traveling device. Therefore the module becomes a convenient inefficient means of transport depending on the density and number of passengers but even if the number of people is high this doesn't mean that they will be deprived of comfort as this vehicle has room even for a bar and a shop. In addition, purchases are made directly from a device without any cash, the same applies to tickets smartphones, smart flocks, PDAs, and other electronic devices that interact with next future transportation and the modules take people to their stops and know exactly where to go. This is possible thanks to the route previously chosen in a special application, the length of each module is eight point eight feet and each module can accommodate up to ten people six standing and four seated. The modules themselves are electrical and therefore environmentally friendly, in addition, they can travel on normal roads and railways and the attachment unit uses a magnetic device. 

3. Aether Cruise Experience: This luxury cruise project is based on a platform for airships developers say that you can travel not only quickly but also with maximum comfort. The futuristic airship operates based on a technology called eros craft. This means that it uses engines as the main source of ascent while helium only compensates the weight of the load. The aircraft is also equipped with a special system that allows the crew to adjust the total weight of the aircraft using air compression. Inside the aircraft, there is a spacious lounge, a dining area, a bar, a kitchen, and passenger rooms with all the necessary amenities. 

4. Dahir Insaat's Road Technology: The world's first automated road complex is designed to reduce costs and improve the quality of road patches, upon arrival at the site the complex is installed on hydraulic supports to not tip over during operation, with the help of a light indicator, the operator determines the processing area selects the size of the repair and then the machine enters into automatic mode. The complex uses a variety of tools changing them in the correct order depending on the ongoing operations. The machine can cut and remove the surface of the old road as well as place pre-prepared patches in place. At the time, the entire technological repair cycle doesn't exceed five minutes and its quality increases significantly due to the structure of the particularly strong patches. 

5. Mercedes concept IAA: This project presented by Mercedes is a true vehicle of the future. Its dimensions are 16 and a half feet long six and a half feet wide and 4.2 feet tall. A hybrid transmission puts the vehicle into operation and its total power is 279 horsepower which allows it to reach a speed of up to 155 miles per hour and an electric journey of up to 40 miles. To achieve better aerodynamics that creates a saying no to the side mirrors replacing them with cameras and to the door handles to installing a special sensor system, instead even more futuristic of the window on the sides of the vehicle which with the help of screen printing technology take on the same color as the bodywork, however, the main feature of this concept is the activation of additional components at the back which make it possible to extend the vehicle and further increase its aerodynamics at high speeds. 

6. TF-X:  On the outside, the TF-X flying vehicle looks like a high tank four-seater sedan, in addition to an aerodynamic bodywork, the vehicle is equipped with folding wings with two electric motors on each side. These engines are powered by the energy produced by the generator along with a 300 horsepower internal combustion engine. The vehicle's wings can be folded horizontally during preparation for flight and can take a vertical position while flying across the surface. The additional propellers provide the TF-X with the ability to take off and land on any short stretch of road and in other words, no runway is required. The air vehicle can reach speeds of 200 miles per hour and fuel and energy are sufficient to overcome distances of up to 500 miles. It's also worth mentioning that the concept is semi-automatic ie the pilot can control it manually or using preset destination coordinates.

7. Transit elevated bus: The creators of this unusual bus set out to defeat the city's traffic jams completely. This is made possible by the unusual design of the vehicle which allows cars to pass underneath it. At the same time, passengers are on an elevated comfortable, and safe platform. The width of this prototype bus and the giant tunnel is about 26 feet around two lanes of traffic at the same time. The length is 72 feet and one of these buses has a capacity for 300 people. The creators also say that a series of several innovative vehicles will be suitable for transporting more than a thousand people despite its impressive size, the transit elevated bus should not occupy a place on the road because all traffic passes through it. To move the bus tunnel through the city, roads must be equipped with a special rail with an emergency braking system. Unfortunately despite the great potential, this concept has not been realized. 

8. Trifan 600: This project for a universal hybrid between an airplane and a helicopter is called Trifan 600. This aircraft which combines the vertical lifting capacity of a helicopter with the speed of an aircraft can be built from composite materials. According to the idea of the creators, the flying vehicle will be designed for five passengers and one pilot. The plane is designed primarily for businessmen and to help solve the problem of traffic congestion in the metropolis, as it moves at four hundred miles an hour. In addition, it can be used to travel between cities. The maximum height limits of the hybrid aircraft are approximately twenty-nine hundred and fifty feet, two turbine engines allow flying between 800 and 1,200 miles without refueling depending on the take-off and the cargo. Vertical take-off is possible thanks to an adjustable three-channel fan built into the fuselage which uses sliding hatches. It is noteworthy that Trifan 600 does not require special areas for takeoff and landing and can land on any smooth surface including the roof of a building or the area in front of a country house.

9. Navya Arma: Independent buses are the most modern technology in this area. This type of vehicle is ecological which is extremely important in the modern world. The boss moves using electrical energy besides being a robot ie the control is carried out using a special computer program and therefore without the human factor. Navya Armor is also functional and very comfortable for passengers. The cabin has an air conditioning system and a special ramp for the comforts of boarding and disembarking disabled passengers. the bus is designed for the transport of 10 to 15 passengers with only four people standing. The average speed of this futuristic vehicle is about 12 to 15 miles per hour and the maximum speed is 27 miles per hour. Passengers have a special program for smartphones and tablets to schedule or reserve a seat. 

10. Willie: The author of this project is a designer named Ted Orlovsky who proposed turning buses into a giant screen on wheels. On the outside of the vehicle is a large LCD panel on which the advertisement is broadcast. It is worth highlighting that even advertising in this means transport is a real innovation, as dynamic videos move along the route and attract the attention of passers-by. When the bus isn't moving it shows you a familiar design. You can see the doors, as well as detailed information about the route, the following stop schedules, and other useful information. When Willie's on the move it becomes an advertising screen. Unfortunately, the designer's project doesn't include a demonstration of the vehicle's interior but it is likely that inside this bus is no less unusual than the outside.

11. Fire Truck of the Future: To make it easier for firefighters to work in a big city and avoid traffic jams Dahir Insaat's designers have developed a concept for a fire truck. This vehicle equipped with signal lamps can be raised above the vehicle flow and moved to balance on two supports eg between the rails if necessary. But this is not its only function, the fire truck doesn't have ladders, as it has a large unmanned aircraft that can lift firefighters and water tanks to the required height in just a few seconds. 

12. Flexible Transport: The basis of this urban vehicle as well as that of the fire engine shown above is the concept of a self-balanced vehicle. Thanks to a stabilization system, this vehicle for a large number of people is balanced on 2 thin poles that move on specially installed rails. In addition, the invention can dodge various obstacles such as bridges and elevated crossings traveling at a higher altitude than other means of urban transportation, thus greatly easing traffic and avoiding congestion. Another advantage of this futuristic development is its transport capacity and respect for the environment.